Seminar Nasional
By March 18, 2013 0 Comments

PENGELOLAAN LAPANGAN MATURE, TEKNIK & STRATEGI MENINGKATKAN PRODUKSI

PENGELOLAAN LAPANGAN MATURE, TEKNIK & STRATEGI MENINGKATKAN PRODUKSI
Hotel Savoy Homann, Bandung | 23 – 25 April  2013 | IDR  10.750.000,- /Participant
Hotel Savoy Homann, Bandung | 09 – 11 Oktober  2013 |     IDR  10.750.000,- /Participant      

 

 

SASARAN BELAJAR :
Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan dan melakukan optimisasi pada saat operasi produksi sumur-sumur dan reservoir minyak, gas dilaksanakan, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan mature.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian permasalahan dalam operasi produksi sumur-sumur minyak dan gas bumi lapangan mature dan mencari strategi meningkatkan produksinya.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi ,melakukan peramalan kinerja dan merencanakan pengembangn operasi produksi lapangan mature.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran pada lapangan mature.
  • Mempergunakan pengetahuan operasi produksi untuk keperluan penyelesaian permasalahan sumur seperti : pada saat penyemenan, penanganan scale, pasir, korosi dan damage yang mungkin terjadi pada sumuran minyak dan gas bumi lapangan mature.
  • Memahami prinsip-prinsip dasar perancangan : penyemenan, workover, stimulasi sumuran dengan  pengasaman dan perekahan hidrololik, perencanaan work over dan lain-lain untuk lapangan mature.

PRE-REQUISITE :

  •   Latar belakang  : Operator, Senior Operator, Engineer/Non Engineer

MATERI KURSUS :

  •   Geologic Considerations in producing Operation
  • Introduction
  • Sandstone Reservoirs
  • Geologic Factors Affecting Reservoir Properties in Sandstone
  • Application of Geologic concepts in Specific Sandstone
  • Carbonate Reservoirs
  •   Application of Geologic Concepts in Carbonate Reservoirs
  • Reservoir Considerations in Well Completions
  •   Introduction
  •   Hydrocarbon Properties of Oil and Gas
  • Recommendations of Obtaining Good Test Data
  •   “Eyeball” Interpretation of Pressure Charts
  • Well Completion Design
  •   Factors Influencing Well Completion Design
  • Conventional Tubular Configuration
  •   Unconventional Tubular Configurations
  •   Sizing Production Tubular
  •   Completion Interval
  •   Permanent Well Completions (PWC)
  • Tubingless Completion
  • Tubing Strings,Packers,Subsurface Control Equipment
  • Tubing Strings
  •   Steel Grades
  • Tubing Connections
  • Makeup of API Threaded connection
  •   Design of Tubing Strings
  • High Strength Tubing
  •   Physical Properties of Steel
  • Sensitivities of High Strength Tubing
  •   Tubing Inspection
  •   Tubing Handling Practices
  •   Equipment for Use With-Strength Tubing
  •   Tubing Running Practices
  • API Publication List
  • Packers and Subsurface Control Equipment
  • Production Packers
  • Subsurface Control Equipment
  •  Perforating Oil and Gas Wells
  •   Introduction
  •   Types of Perforators
  • Evaluation of Perforator Performance
  •   Factors  Aftecting Gun Perforating Results
  • Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  • A Comparison between the GEO-VANN System and Other Perforating Methods in Wells Equipped with Packers
  • Completion and Workover Fluids
  • Functions-Requirements-Selection Criteria
  • Formation Damage Related to Solids
  • Oil Fluids-Practical Application
  • Conventional Water-Base Mud
  • Oil Base or Invert-Emulsion Muds
  • Foam
  • Perforating Fluids
  • Packer Fluids
  • Well Killing
  •  Production Logging
  • Introduction
  •   Logging Device
  •   Application of Production logging
  • Field Examples of Production Logging Techniques
  • Primary Cement Evaluation
  •  Problem Well Analysis
  • Problem Wells
  • Problem Well Analysis Checklist
  • Parafin and Asphaltene
  • Introduction
  • Paraffin and Asphaltene Chemistry
  • Deposition Mechanisms
  • Removal of Wax Deposits
  • Preventing or Decreasing Wax Deposition
  • Design of Wax Control
  • Squeeze Cementing-Remedial Cementing
  •   Introduction
  • Theoretical Considerations
  • Practical Considerations
  • Special Squeeze Cementing Situations
  • Planning a Squeeze Cement Job
  • Normal Operational Procedures
  • Other Operational Procedures
  • Plug-Back Operations
  • Special Cement Systems
  • Sand Control
  •   Introduction
  • Reduction of Drag Force
  • Mechanical Methods of Sand Control
  •   Practical Considerations in Gravel Packing
  • Use of screen Without Gravel
  • Resin Consolidation Methods
  • Formation Damage
  •   Introduction
  • Basic Causes of Damage
  • Classification of Damage Mechanisms
  •   Reduced Absolute Permeability
  •   Increased Fluid Viscosity (Emulsion)
  •   Diagnosis of Formation Damage
  • Surfactants for Well Treatments
  • Characteristics of Surfactants
  • Use and Action of Surfactant
  • Formation Damage Susceptible to Surfactant Treatment
  •   Preventing or Removing Damage
  •   Well Stimulation With Surfactants
  • Increasing Effectiveness of Rod Pumping
  • Prevention of Well Damage
  • Acidizing
  • Acids Used in Well Stimulation
  •   Acid Additives
  • Carbonate Acidizing
  •   Acidizing Techniques for Caronat Formations
  •   Sandstone Acidizing
  •   Potential Safety Hazard in Acidizing
  • Hydraulic Fracturing
  •   Introduction
  •   Mechanics of Fracturing
  •   Production Increase from Fracturing
  • Propping the Fracture
  • Frac Fluids
  •   Frac Job Design
  •   Frac Job Evaluation Techniques
  •  Scale Deposition,Removal,and Prevention
  •   Introduction
  • Causes of Scale Deposition
  •   Prediction and Identification of Scale
  •   Scale Removal
  •   Scale Prevention
  • Corrosion Control
  • The Corrosion Process
  •   Detection and Measurement of Corrosion
  •   Corrosion Control
  • Workover and Completion Rigs Workover System
  • Conventional Production Rigs
  • Non-Conventional Workovers System
  •   Concentric Tubing Workovers
  • Workover Planning
  • Reasons for Workover
  • Workover to Alleviate Formation Damage
  • Workover for Low Permeability Well
  • Workover of Wells in Partially Pressure-Depleted Reservoirs
  •   Workover to Reduces Water Production in Oil and Gas Wells
  •   Workover to Reduces Gas Production in Oil Wells
  • Workover for Sand Control
  •   Workover to Repair Mechanical Failure
  • Workover to Change Zones or Reservoirs
  •   Workover to Multicomplete
  • Workover to Increase Production in Well Producing High Viscosity (Low Gravity) Oil
  • Workover Economics

INSTRUKTUR :
Dr.Ir. Sudjati Rachmat, DEA

ASISTEN :
Ir. Ardhi Lumban Gaol

VANUE AND DATE

Vanue  :

Hotel Savoy Homann, Bandung
Date :

  • 23 – 25 April  2013  ( Batch I )
  •   9 – 11 Oktober  2013 ( Batch II)

FACILITIES

  • Training Kit
  •   Soft Copy Material Training On Flashdisk 4GB.
  •   Coffee Break & Lunch
  •   Certifikat
  •   Souvenir
  • Additional Program (optional)

INVESTATION
IDR  10.750.000,- /Participant Non residential. Fir send 3 participant from the same company IDR. 9.250.000,-/participant.

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • MySpace
  • YahooBuzz
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • Technorati
  • YahooMyWeb
Posted in: Uncategorized

Post a Comment


Website Edukasi Terbaik Indonesia